SwingMax: Precise dribble bar applicator for maximum efficiency
State-of-the-art slurry spreading with flexible working widths of up to 36 meters

The problem: Conventional spreaders create uneven distribution, waste nutrients, and require extra passes over tramlines, causing soil compaction and losses.

The solution: SwingMax distributes slurry precisely across up to 36 meter widths using optimized macerators and hose routing. It maximizes tramline use, cuts passes drastically, and offers flexible section cut-off for any field shape—delivering better nutrient utilization, reduced travel, and minimal soil disturbance.

Quote

The SwingMax is a dribble bar applicator system for low-to-the-ground slurry spreading from tankers with working widths of 21–30 meters (SwingMax36 up to 36 m). It consists of decentralized ExaCut precision slurry macerators, optimized discharge hoses of equal length, and a special double-tube frame design (SwingMax36: triple frame), which makes the applicator stable, lightweight, and low-service despite its large working width.

The slurry is fed centrally into the decentralized ExaCut precision slurry macerators and precisely distributed to all application points via optimized, equal-length hoses—it is then deposited beneath the plants rather than sprayed onto them, as is the case with wide-spread slurry macerators. The result: uniform plant growth, and significantly lower ammonia emissions.

The SwingMax combines maximum stability at minimum weight with decentralized ExaCut slurry macerators for easy maintenance. Key features include: optimized discharge hoses of equal length (prevents a “V” pattern at the start of application), rigid end hoses for a defined swath spacing, UV-resistant Vogelsang specialty hose, DropStop (180° upward swivel to prevent dripping), slope compensation for uneven terrain, and Comfort Flow Control (CFC) for flexible hose group shut-off from the cab. All of this results in: maximum cost-effectiveness, and maintenance-free operation.

The SwingMax is the optimal solution for contract farming businesses, machinery cooperatives, and large operations with wide working widths. Thanks to its double-tube frame design, it handles the highest dynamic loads and variations (thin and viscous slurry), while guaranteeing maximum efficiency through weight optimization.

Yes. The SwingMax is delivered as an EasyPack on a transporting frame—fully pre-assembled and tested. This allows you to perform retrofitting of the system quickly and easily on-site with minimal effort. Alternatively, direct assembly is possible by Vogelsang-BeTEC.

Standard working widths are 21 m, 24 m, 27 m, 28 m, and 30 m—allowing you to make optimal use of existing tramlines and reduce the number of passes. With the SwingMax36, a width of up to 36 meters is even possible.

The SwingMax enables nutrient-efficient, shallow spreading through precise exact spreaders, optimal hose routing, and rigid end hoses—the slurry is deposited precisely beneath the crop, not on top of it. This maximizes nutrient uptake by plants, minimizes ammonia emissions, and thus significantly reduces the need for mineral fertilizer additions.

Why choose the SwingMax dribble bar applicator?

The SwingMax revolutionizes slurry spreading through precise slurry macerators, optimized hose routing, and an intelligent frame design. These advantages speak for themselves:

Save on operating costs right from the start: The SwingMax significantly reduces your operating costs—thanks to maximum working widths of up to 36 meters, fewer passes, and optimized fuel consumption. For large areas where every euro counts, the investment pays for itself quickly through the kilometers saved.
Planned service instead of surprises: The decentralized ExaCut slurry macerators enable QuickService in under 20 minutes. You can plan service visits in advance, avoid unplanned downtime during the season, and maintain consistent and reliable performance.
Consistent yields through even nutrient distribution: With ExaCut macerators in use application accuracy remains stable across all field sections while maintaining optimal performance. No gradual distribution losses, no “V-shaped” pattern at the start of application—maximum yield safety across the entire area.
Flexible operational readiness: The EasyPack concept saves valuable installation time. The system can be quickly retrofitted to various tankers; TopSwing/TeleShift enable variable working widths—standardized options simplify adaptation to different field sizes worldwide.
Sustainability through precision: Close-to-the-ground, uniform spreading means lower ammonia emissions, reduced mineral fertilizer requirements, and optimized nutrient utilization. With the SwingMax, you’re investing in a more environmentally friendly and cost-effective solution.

Conclusion: The SwingMax is the investment of choice for operations that take efficiency and profitability seriously. With working widths of up to 36 meters, maximum spreading accuracy, and minimal maintenance time, it reduces travel costs, optimizes nutrient utilization, and ensures reliable yields. For contracting firms, machinery cooperatives, and large-scale operations, the SwingMax is the optimal solution for economical and sustainable manure management.

SwingMax

Dribble bar applicator for large working widths
The SwingMax is the standard system for slurry spreading with working widths of 21–30 meters. The double-tube frame design withstands high dynamic loads while keeping weight to a minimum. With decentrally mounted ExaCut precision slurry macerators, TopSwing/TeleShift options, and Comfort Flow Control, it offers maximum flexibility for different field sizes and farm types.

Typical applications: contracting firms, machinery cooperatives, and large agricultural operations with stable tramlines and medium to large acreage.

SwingMax36

Dribble bar applicator for extreme working widths
The SwingMax36 extends the working width to an extreme 36 meters, opening up a new dimension in area coverage. The triple-frame design with an additional folding element and three ExaCut slurry macerators ensures consistent distribution accuracy even at maximum width. TeleShift and TopSwing allow for flexible reduction to 21, 24, or 30 meters for variable applications.

Typical application: Large-scale operations and specialized contracting firms with large, regular field layouts—where tramlines up to 36 meters wide can be used.

SwingMax Slide

Trailing shoe for spreading close to the ground
The SwingMax Slide is the trailing shoe variant of the SwingMax and operates with working widths of 21–30 meters. The trailing shoe parts the crop and deposits slurry directly on the ground—significantly closer to plant roots than drag hose systems. With robust, permanently elastic skids, the system adapts optimally to the ground contour, making it ideal for low-emission and nutrient-efficient spreading on all crops.

Typical applications: Operations focused on maximum nutrient efficiency, organic farming, specialty crops, and regions with stricter emission regulations.