GL series: The gearless rotary lobe pump by Vogelsang
GL series

The gearless rotary lobe pump
GL series

  • Up to 54 % less weight
  • Up to 35 % less space
  • Easier service
  • Lower power consumption
  • Incredibly quiet running

Request

The rotary lobe pump principle
How Vogelsang rotary lobe pumps work

The rotary lobe pump is a positive displacement pump. The pumping principle is based on two counter-rotating pumping elements, known as the rotary lobes. These are mounted on two synchronized shafts. The rotational movement of the lobes increases the volume of the pumping chamber on the suction side. This creates suction, which draws the medium into the rotary lobe pump. As the rotational movement continues, the medium is then enclosed in cavities between the rotary lobes and pump housing and it is issued on the discharge side by the pumping chambers as they reduce in size again; the rotary lobe pump conveys the medium directly. Due to their mirror-symmetrical design, rotary lobe pumps are independent of the direction of rotation and can pump in either direction without restriction. The HiFlo lobes developed in the 1990s operate pulsation-free, ensuring low-vibration and exceptionally gentle pumping.


Features of the GL series

On rotary lobe pumps from Vogelsang, wear on the pump housing segments is compensated without using additional parts. This makes the most of the material and prolongs service life.

Additional information:
Axial wear plates are made from highly wear-resistant special steel and therefore extend maintenance intervalls. They offer protection for the entire pump chamber and therefore not only simplify maintenance, but also minimize downtime. At the same time costs are minimized.

Additional information:
Quality cartridge: The mechanical seal for pumps by Vogelsang
The Vogelsang Quality Cartridge stands for modern sealing technology. The mechanical seal in cartridge design is manufactured automatically in the factory, completely pre-assembled and checked by computer. This makes it quick and easy to change on site: assembly errors are avoided and the time required is reduced. This means quick and easy replacement of the shaft seal as well as safe commissioning after seal replacement.

Additional information:

VX pumps from Vogelsang have sturdy, break-proof shafts with a large diameter and without cranks and recesses to weaken them. The benefit is that Vogelsang rotary lobe pumps give a minimum shaft deflection even under high pressure, very low start-up wear, and ultimately reduced operating costs and spare parts costs.

Additional information:
Vogelsang rotary lobe pumps are built according to a unique element-based design. With them, the customer isn’t forced to replace the entire body, but instead just the element that is affected. The economical replacement of individual components not only makes maintenance simpler and quicker, but simultaneously reduces the operating costs.

Additional information:

Options of the GL series

InjectionSystem for rotary lobe pumps by Vogelsang
The InjectionSystem significantly improves the foreign-matter resistance of the pump. It increases the efficiency and improves the suction capacity through optimized volumetric efficiency. Thanks to the InjectionSystem the service life of the pump is extended. Field trials prove a longer period of up to 2.5 times.

Additional information:
The wear plates, made from highly wear-resistant special steel, extend maintenance intervals considerablx, simplify maintenance and minimize downtimes. Also your costs are significantly reduce during maintenance.

Additional information:
Unlike conventional lobes, Vogelsang’s HiFlo® lobes ensure pulsation-free pumping and consequently longer lifetimes for the drive and coupling. At the same time, the suction capacity is increased due to the higher number of sealing lines. The improved internal sealing enables suction from deep pits.

Additional information:
The speed-dependent displacement of the VX rotary lobe pumps makes them ideal for precise longitudinal distribution within the spreading swath. Either screwed directly into the gearbox or in conjunction with the UDS both versions of the Vogelsang speed sensor are used to calculate the flow rate, allowing precise control of the required spreading capacity.
We offer another option which is perfectly suited to road transport: aluminum pump housing and lobe cores. This helps haulers to keep the tare of the transport vehicle to a minimum and thus increase the payload. The gearbox housing, bearing seal housing and QuickService cover are all made of aluminum. Particular attention has been paid to making sure that all components that come into contact with the medium are lined with robust gray cast iron or highly wear-resistant special steel.

Additional information:

  • The compact and light pump[br]GL186

The gearless pump that is more compact and lightweight than ever before
Rotary lobe pump GL186

The GL 186 series is characterized by its sturdiness and power. As with the VX series, this gearless variant of the rotary lobe pump is just as powerful. The series is currently available in two different sizes. It is particular suitable for use in mobile applications where space is at a premium and a low unladen weight is required yet large quantities still have to be transported safely and reliably. Highly practical optional extras of the GL rotary lobe pump such as our tried-and-tested wear plates also mean they are suitable for applications where sturdiness is essential. At the same time, the pistons can be removed independently for even easier servicing.