FX series

Proven liquid manure pump that offers you more

  • Additional lubrication is no longer required due to integrated circulating oil lubrication
  • Rotating separation plate for low energy consumption
  • Long lifetime thanks to industrial-standard block ring seal

Click on an icon to know more.

Agricultural technology

Agricultural technology

FX series - The flexible liquid manure pump for everyday farm work

The FX series, or FarmerPump, is Vogelsang's liquid manure pump. It was custom-developed for agricultural use, and makes pumping easier at a reasonable cost. The upgraded product from the proven R series has an industrial-standard block ring seal, a rotating separation plate and a circulating oil lubrication system integrated as standard. That makes the FarmerPump ideal for everyday routine work on the farm. The FarmerPump is also flexible in application: It can be operated anywhere via a power take-off, for example as a permanent installation, or as a mobile unit with the three-point base. The rotating separation plate between the lobes prevents the accumulation of fibrous matter in the liquid manure. This maintains the full pump performance and minimizes diesel or electricity consumption. This rotary lobe pump is a professional liquid manure pump with no torque increase. Its performance range was specially designed for agricultural use, with six expansion stages up to max. 8 bar and max. 4,500 l/min.

To Agricultural Technology World

More information on agricultural applications

Contact us!

Do you have questions?
We are glad to help you!

+44 1270 216600



With our extensive selection of lobe geometry and materials, we will find the right long-life lobe for your media, e.g. NBR, NBR white, SBR, EPDM-SL, EPDM-AL, EPDM white, CSM, FKM, PU, stainless steel oder nitrided steel. The lobes can be produced in a straight, double-wing geometry or as 3-wing; 4-wing or 6-wing, pulsation-free HiFlo lobes.

Additional information:
Alongside the standard model in abrasion-resistant gray cast iron, versions in stainless steel are stocked as well. Other options for customization include heat treatment and wear-resistant coatings for the wear plates and housing components.
Axial wear plates are made from highly wear-resistant special steel and therefore extend maintenance intervalls. They offer protection for the entire pump chamber and therefore not only simplify maintenance, but also minimize downtime. At the same time costs are minimized.

Additional information:
Thanks to the oil circulation lubrication, the FarmerPump requires almost no maintenance at all. An oil pump built into the gearbox provides an even and constant supply of oil to all the relevant gaskets, thus removing the need for manual lubrication.
The rotating separation plate between the lobes prevents the accumulation of fibrous matter. This helps to maintain full pump performance and minimizes diesel and electricity consumption.
The block ring seals installed in the FarmerPump are special mechanical seals made to industry standards. The special design has been developed especially to increase the pump's resistance to fibers in the liquid manure, thus significantly extending the lifetime of the unit compared to those that use traditional mechanical seals.

As non-contacting, rotating positive displacement pumps, rotary lobe pumps convey a wide range of fluids and media reliably. Two counter-running elastomer-coated rotary lobes ensure sealing at all lobe positions between the suction side and discharge side of the self-priming positive displacement pump. The medium is pumped gently. The pumping work is performed by the rotary lobes in the pump housing. These lobes are on a shaft driven by an external gearbox. This is where the bearings are located. On the suction side, the lobe movement increases the volume, creating suction. This sucks the pumped fluid into the pump. Accordingly, the rotary lobe pumps convey the medium directly. They can change the flow direction and prime actively. Thanks to the lobe principle, these pumps are suitable for particularly gentle conveying.

Due to the wide range of applications, we offer our customers the following drive variants for the FarmerPump:

Drive power via cardan shaft

  • Power transfer via cardan shaft
  • Mounted on three-point base

Drive power via hydraulic motor

  • Drive power via directly flanged-in hydraulic motor
  • No base required

Drive power via geared motor

  • Power transfer via coupling
  • Mounted on a torsionally stiff motor base

Drive power via variable speed gearbox

  • Power transfer via coupling
  • Mounted on a torsionally stiff motor base

Drive power via combustion engine

  • Power transfer via coupling
  • Mounted on a torsionally stiff special base, which converts to a hand cart

Drive power via electric motor

  • Power transfer via belt drive


  • Agriculture

    Technical Specifications

    Max. pressure
    8 bar
    6.96 l
    max. Capacity
    270 m3/h
    650 min-1
    Free passage
    48 mm

    Do you have any questions? How can we help you?

    Further information and brochures can be found in our download center.

    / /